ADATA has a very broad portfolio of consumer NVMe SSDs, featuring most of the controller solutions available on the open market. Not all of these have been particularly successful, but the most recently released drives use a formula that has been working well for several other players in the SSD market: Silicon Motion's SM2262 controller combined with Intel/Micron 64-layer 3D TLC NAND flash memory. The ADATA XPG SX8200 and GAMMIX S11 SSDs differ primarily in branding and the design of their heatspreaders, but underneath they both feature the same SSD architecture that we've found makes for a great combination of high performance and reasonable prices.

The SX8200 and GAMMIX S11 replace several older ADATA SSDs that used Silicon Motion's first NVMe SSD controller, the SM2260. The XPG SX8000 paired that controller with Micron's 32-layer 3D MLC NAND, while the XPG SX7000 and GAMMIX S10 used Micron's 32-layer 3D TLC NAND. Those first-generation NVMe drives from ADATA suffered from the limitations of the SM2260 controller and the first-generation 3D NAND from Intel and Micron. As a result, even the use of MLC NAND in the SX8000 couldn't enable it to reach the performance of good TLC-based SSDs like the Samsung 960 EVO. The SX7000 and GAMMIX S10 were even worse off and despite ADATA's branding (and pricing) them like high-end SSDs, they were among the slowest NVMe SSDs on the market and could not reliably outperform mainstream SATA SSDs.

ADATA Consumer NVMe SSD Comparison
Model XPG SX8200,
XPG GAMMIX S11
XPG SX8000 XPG SX7000,
XPG GAMMIX S10
Capacities 240–960GB 128GB–1TB 128GB–1TB
Controller Silicon Motion SM2262 Silicon Motion SM2260
NAND Flash Micron 64L 3D TLC Micron 32L 3D MLC Micron 32L 3D TLC
Form-Factor double-sided M.2-2280, PCIe 3.0 x4
Protocol NVMe 1.3 NVMe 1.2
Sequential Read 3150–3200 MB/s 1000–2400 MB/s 660-1750 MB/s
Sequential Write 1100–1700 MB/s 300–1000 MB/s 450-860 MB/s
Random Read 200k–310k IOPS 45k-100k IOPS 35k-130k IOPS
Random Write 240k–280k IOPS 75k-140k IOPS 95k-140k IOPS
Warranty 5 years
Write Endurance 0.37 DWPD 0.34 DWPD 0.34 DWPD
Announced March 2018 (SX8200)
April 2018 (S11)
September 2016 April 2017 (SX7000)
July 2017 (S10)

ADATA has also released or announced several other consumer NVMe SSDs that aren't included in the chart above. The SX6000 and SX7100 use Realtek controllers and the SX9000 uses a Marvell controller. The Silicon Motion-based drives occupy the middle of the lineup and are the most popular and widely available NVMe drives from ADATA.

This year, most of the SSD industry is working with 64-layer 3D NAND (almost exclusively TLC NAND), and there's no clear winner or loser in raw NAND performance this time around. Silicon Motion's second-generation NVMe controllers are capable of delivering far higher performance than the disappointing SM2260, and the market for high-end SSDs is no longer dominated exclusively by Samsung.

Intel was first to market with the SM2262 controller in the 760p SSD, which features some Intel-specific customizations to the Silicon Motion reference design. The ADATA XPG SX8200 and GAMMIX S11 are much closer to the reference design, but use NAND that has been binned and packaged by ADATA, and come with ADATA's own heatspreader designs. The other SM2262 drive we've reviewed is the 1TB HP EX920. Compared to the EX920, the ADATA drives have lower usable capacities due to reserving more spare area, which usually improves sustained write performance. Today's review focuses on 240GB and 480GB models from ADATA, which gives us a chance to see what performance is like at the more affordable end of the product line. We can also compare the performance of the SX8200 with no heatspreader against the GAMMIX S11 with a heatspreader (and with slightly newer firmware). Spoiler: those differences never matter to real-world usage. For all practical purposes, the SX8200 and GAMMIX S11 are just cosmetically different.

ADATA XPG SX8200 and GAMMIX S11 Specifications
Capacity 240 GB 480 GB 960 GB
Controller Silicon Motion SM2262
NAND Flash Micron 64L 3D TLC
Form-Factor, Interface M.2-2280, PCIe 3.0 x4, NVMe 1.3
Sequential Read 3200 MB/s 3200 MB/s 3150 MB/s
Sequential Write 1100 MB/s 1700 MB/s 1700 MB/s
Random Read IOPS 200K IOPS 310K IOPS 310k IOPS
Random Write IOPS 240K IOPS 280K IOPS 280k IOPS
Warranty 5 years
Write Endurance 160 TB
0.37 DWPD
320 TB
0.37 DWPD
640 TB
0.37 DWPD
Current Retail
Price
SX8200 $91.93 (38¢/GB) $139.99 (29¢/GB) $284.99 (30¢/GB)
S11 $84.99 (35¢/GB) $159.99 (33¢/GB) $299.99 (31¢/GB)

ADATA's performance specifications for the SX8200 and GAMMIX S11 show that the 240GB models are significantly handicapped for all access patterns other than sequential reads. Even so, that smallest SX8200 is rated to easily outperform the largest and fastest model from the preceding SX8000 family. With the move to higher-density 3D NAND, ADATA has dropped the 128GB capacities from the lineup. Performance at that capacity would be even lower than what the 240GB models provide, and would no longer be reasonable for a high-end NVMe SSD. ADATA's low-end SX7100 series is planned to retain a 120GB option. ADATA has not yet brought a 2TB M.2 NVMe SSD to market, but they are prepared to extend the SX8200 family to a 1.92TB (usable capacity) model.

Write endurance for the SX8200 and GAMMIX S11 is rated for a little over the typical 0.3 drive writes per day, and the five year warranty period is standard for high-end SSDs. The PCB used by the SX8200 and GAMMIX S11 has components on both sides at all capacities, so even without the heatspreaders these drives won't fit into every notebook computer.

The ADATA XPG GAMMIX S11 comes with the same two-tone textured heatspreader that was used on the GAMMIX S10. The thermal pads anchor the red parts of the heatspreader to the chips below while the black recessed area does not make contact with the drive. The ADATA XPG SX8200 comes with a flat black heatspreader ready to be installed and a thermal pad that makes full contact with the controller, DRAM and NAND packages on the top side of the drive. For this review, the SX8200s were tested without the heatspreaders installed.

In addition to comparing the SX8200 and GAMMIX S11 against their immediate predecessors from ADATA, this review compares them against the following competitors:

  • The 1TB HP EX920, as an example of a higher-capacity SSD with essentially the same internals
  • An assortment of Samsung NVMe SSDs that generally represent the gold standard for high-performance high-price SSDs.
  • The Intel Optane SSD 900P and 800P, the most expensive consumer SSDs, with absolutely unbeatable performance in some areas, but not the fastest in every category.
  • The Intel SSD 760p, very similar to the SX8200 or HP EX920 save for some customizations that Intel hasn't detailed.
  • The second-generation Western Digital WD Black, a top of the line TLC-based SSD with a new in-house controller that poses the most direct threat Samsung's 9x0 EVO SSDs have faced so far.
AnandTech 2018 Consumer SSD Testbed
CPU Intel Xeon E3 1240 v5
Motherboard ASRock Fatal1ty E3V5 Performance Gaming/OC
Chipset Intel C232
Memory 4x 8GB G.SKILL Ripjaws DDR4-2400 CL15
Graphics AMD Radeon HD 5450, 1920x1200@60Hz
Software Windows 10 x64, version 1709
Linux kernel version 4.14, fio version 3.6
Spectre/Meltdown microcode and OS patches current as of May 2018
AnandTech Storage Bench - The Destroyer
Comments Locked

19 Comments

View All Comments

  • Pewzor - Tuesday, May 14, 2019 - link

    FuzeDrive (aka Virtual SSD) is used by Dell EMC data center, people saying you lose FuzeDrive you lose everything is just full of it. FuzeDrive is just Virtual SSD (by Enmotus) rebranded for AMD use.
    It works like Intel Rapid Storage except VSSD is data center proven.
    There's a very little chance for total catastrophic failure to happen, which could happen to IRST as well.
    You will lose your data when multiple drives fail at the same time, which is true even for raid 1 and raid 5.
    VSSD/FuzeDrive when it pushes data across different devices it creates a mirror in (duplicates in shadow file), and the duplicates are not purged until after the data is verified to complete copying to the new destination drive.
    Only time this happens is when file is copied the destination drive fails the instant the copy is verified then the source device fails and breaks the shadow image.
    Technically even a 3 drive raid 5 array could fail catastrophically if all 3 drives failed.
  • eddieobscurant - Thursday, July 26, 2018 - link

    I think the drives deserved an award.
  • Samus - Thursday, July 26, 2018 - link

    Double sided :(

    Would be good for a notebook considering the power profile and price. The 980 EVO is just dangerous in a mobile device so I've been sticking to the WD Black, which is still pretty expensive.
  • wolve - Thursday, July 26, 2018 - link

    FYI this SSD is on sale for $100 on Rakuten. Got it a few weeks ago when they had a similar deal.
    https://www.rakuten.com/shop/adata/product/ASX8200...
  • SanX - Saturday, July 28, 2018 - link

    This drive was completely destroyed by the Destroyer still the author and the crowd sing the Dithyrambs to it.
  • gglaw - Saturday, August 11, 2018 - link

    the vast majority of home users could not even emulate the Destroyer tests if they tried and it has no bearing on the actual user experience. It is there mostly for academic purposes - did you even read the details of what the Destroyer test runs? For even an advanced home techie, this drive's price/performance is most likely the best that currently exists, especially when it goes on sale for $95 for the ~500GB model. That's not much higher than a budget SATA drive for identical performance to a 970 EVO or WD Black for home use. It's been on sale for $95-$100 3X now that I'm aware of, not only should the author give it a positive review, for the segment it addresses I feel it should be even given Editor's Choice. And yes I have 2 of these so not just making up opinions based on reading tests that I don't understand. There is absolutely no visible difference between this, the 960 EVO and 970 EVO which I have all running in the same LAN room.
  • Wolfclaw - Tuesday, July 31, 2018 - link

    Based on review, I purchased the 240GB SX8200 for new Ryzen build, it came yesterday, now just waiting for the motherboard ... running out of patience :(
  • Wolfclaw - Saturday, August 4, 2018 - link

    OK, got one for my x470 and it is fast, would I notice the difference to say a Samsung, I doubt it. 4 seconds form boot to W10 desktop, I have a large Outlook data footprint and it opens and is ready a lot quicker than my old SSD, Visual Studio is extremely responsive with it.
  • a_pete - Friday, August 31, 2018 - link

    I think there's an issue in the power consumption information for the Optane 800p.

    It's being listed here (and on other charts) as using 0.8W while active, but on the review page it was actually using 3.5W active. This is messing up all the Power efficiency charts.

    Thanks!

Log in

Don't have an account? Sign up now