ADATA Announces XPG Gammix S11 Pro: SM2262EN, 3D TLC, Up to 3.5 GB/sby Anton Shilov on December 13, 2018 3:00 PM EST
- Posted in
- Silicon Motion
- 3D TLC
- XPG Gammix S11
ADATA on Thursday introduced its highest-performing SSD to date, featuring sequential read speeds of up to 3.5 GB/s and random read speeds of up to 390K IOPS. The enthusiast-class PCIe 3.0 x4 drive, whose formal launch had been expected for quite a while, is powered by Silicon Motion’s range-topping controller.
The ADATA XPG Gammix S11 Pro is based on Silicon Motion’s SM2262EN controller, which is a seriously revamped version of the SM2262 (eight NAND channels supporting up to 800 MT/s data transfer rates, four ARM Cortex-R5 cores, NVMe 1.3, LDPC ECC, RAID engine, etc.) that operates at higher clocks and features some additional firmware-based optimizations to drive performance up.
SMI officially introduced this controller in mid-2017, but the chip took a long time to see adoption as we’ve only recently seen SSD vendors use it. ADATA is one of the adopters of the SM2262EN that have decided to pair it with proven 64-layer 3D TLC NAND memory in a high-end SSDs. Over time, we expect the controller to be used with other types of flash as well.
The XPG Gammix S11 Pro drives come in 256 GB, 512 GB, and 1 TB configurations, all featuring a PCIe 3.0 x4 interface. The SSD is outfitted with the company’s aluminum heat spreader to ensure consistent performance (assuming that airflows in the PC case are organized properly).
Speaking of performance, ADATA’s numbers are similar to those published by Silicon Motion: up to 3.5 GB/s sequential read speed and up to 3 GB/s sequential write speed when SLC caching is used (data based on CDM benchmark), as well as up to 390K/380K random read/write 4K IOPS.
Moving on to endurance and reliability of the Gammix S11 Pro SSDs. The new drives are covered with a five-year warranty and are rated for 160 TB, 320 TB, as well as 640 TB to be written, depending on the SKU.
|ADATA XPG Gammix S11 Pro Specifications|
|Capacity||256 GB||512 GB||1 TB|
|Controller||Silicon Motion SM2262EN|
|NAND Flash||IMFT 3D TLC NAND|
|Form-Factor, Interface||M.2-2280, PCIe 3.0 x4, NVMe 1.3|
|Sequential Read||3500 MB/s|
|Sequential Write||1200 MB/s||2300 MB/s||3000 MB/s|
|Random Read IOPS||220K IOPS||390K IOPS|
|Random Write IOPS||290K IOPS||380K IOPS|
|DRAM Buffer||Yes, capacity unknown|
|TCG Opal Encryption||No|
|Power Management||DevSleep, Slumber (0.14 W).|
|TBW||160 TB||320 TB||640 TB|
ADATA did not disclose when it plans to start sales of the XPG Gammix S11 Pro SSDs, but keeping in mind that competing products are already here, it is in the company’s best interest to start shipments of the drives as soon as possible.
When it comes to pricing, the 256 GB version has an MSRP of $110, the 512 GB SKU carries a price tag of $170, whereas the 1 TB model is set to be priced at $270.
- The Silicon Motion SM2262EN SSD Controller Preview: Good And Bad Amplified
- ADATA XPG Gammix S11: SM2262 with Heat Spreader for Gamers
- The ADATA XPG SX8200 & GAMMIX S11 NVMe SSD Review: High Performance At All Sizes
Post Your CommentPlease log in or sign up to comment.
View All Comments
surt - Tuesday, December 18, 2018 - linkIn fairness to the graphic designer, wheel direction becomes relatively unimportant once your car is flying.
Mahigan - Saturday, January 4, 2020 - linkYes, identical. Except one has a heatsink and the other doesn't. This is perfect. Some motherboards come with an NVME heatspreader while some don't.
So I used SX8200 Pro drives for my Gigabyte AORUS motherboards (placing them under the included NVME heatsinks) and then used the Gammix S11 Pro on a PCIe NVME expansion card I bought off Ebay which works well due to the S11 Pro's included heatsink.
I like that you can get either model. The SX8200 Pro does come with an optional heatsink though. Just in case.