It may be a bit later than originally planned, but Samsung's first consumer SSD to support PCIe 4.0 is here. The Samsung 980 PRO was first previewed at CES in January, but we didn't hear anything further until leaks started appearing towards the end of summer. Now the 980 PRO is set to kick off a new wave of PCIe 4.0 SSD releases. These new changes are the most significant changes to Samsung's PRO SSD line since the debut of its first NVMe drive.

The Samsung 980 PRO PCIe 4.0 SSD

As we march onto a world where PCIe 4.0 is going to start being offered to the vast majority of consumers in all segments of computing, the move is on in order to enable support for these new standards. Benefits such as increased peak speed, or decreased power consumption, are obvious vital specifications that PCIe 4.0 brings to the table, and thus having optimized products to go along with it has always been the case as new generations trump the told. Samsung's first PCIe 4.0 x4 offering for consumers is the 980 PRO, a series of M.2 drives with capacities up to 2.0 TB. 

These new drives feature the latest in Samsung's controller design, but also mark the change from 2-bit cells to 3-bit cells for the Pro line of drives. This creates changes for increased capacity and decreased cost, and due to Samsung's controller technology the lower theoretical endurace we might expect with TLC is still covered by the warranty. Samsung's Pro line of storage drives have always been designed to impress, always being in the upper echelons for performance for the market. This is what we're here to test in this review.

Samsung 980 PRO SSD Specifications
Capacity 250 GB 500 GB 1 TB 2 TB
Interface PCIe 4 x4, NVMe 1.3c
Form Factor M.2 2280 Single-sided
Controller Samsung Elpis
NAND Samsung 128L 3D TLC
LPDDR4 DRAM 512MB 1GB 2GB
SLC
Write Cache Size
Min 4 GB 4 GB 6 GB TBD
Max 49 GB 94 GB 114 GB
Sequential Read 6400 MB/s 6900 MB/s 7000 MB/s
Sequential Write SLC 2700 MB/s 5000 MB/s 5000 MB/s
TLC 500 MB/s 1000 MB/s 2000 MB/s
Random Read
IOPS (4kB)
QD1 22k 22k 22k
Max 500k 800k 1000k
Random Write
IOPS (4kB)
QD1 60k 60k 60k
Max 600k 1000k 1000k
Active Power Read 5.0 W 5.9 W 6.2 W
Write 3.9 W 5.4 W 5.7 W
Idle Power APST 35 mW
L1.2 5 mW
Write Endurance 150 TB
0.3 DWPD
300 TB
0.3 DWPD
600 TB
0.3 DWPD
1200 TB
0.3 DWPD
Warranty 5 years
Launch MSRP $89.99
(36¢/GB)
$149.99
(30¢/GB)
$229.99
(23¢/GB)
TBD

Today we are testing the 250 GB and 1 TB models, representing the current minimum and maximum of what is on offer. The 2 TB model is set to come to retail at a later date, along with its respective specifications.

Two Waves of PCIe 4.0 Storage: Wave One

AMD kicked off the transition to PCIe 4.0 last year with the release of their Zen 2 family of CPUs. This started the first phase of PCIe 4.0 SSDs, starting with Phison.

Phison was the only SSD controller vendor ready with a PCIe 4.0 solution at the time; its E16 controller has enjoyed over a year on the market as the only option for consumer PCIe 4.0 SSDs. We're reported a lot about it as well. But the Phison E16 was a bit of a rushed design, with a minimum of changes to their highly successful E12 controller to enable PCIe 4.0 support. That left the E16 with some notable shortcomings: it only offers slightly more peak bandwidth provided by the upgrade to PCIe 4.0, and the extra performance comes with a lot of extra power consumption. The rest of the SSD industry decided to take the PCIe 4.0 transition a bit more slowly, preparing more mature controller designs to be manufactured on smaller process nodes that can provide the efficiency necessary to use the full speed of a PCIe 4.0 x4 link while staying within the thermal and power constraints of a M.2 drive.

All the major players in the SSD controller market have been preparing for this second wave of Gen4 drives, but Samsung is making the first move in this round. The 980 PRO introduces the new Samsung Elpis controller, built on their 8nm process and designed to double the peak performance offered by PCIe Gen3 SSDs.

Wave Two Starts With Samsung

In addition to the new Elpis controller, the 980 PRO introduces a new generation of 3D NAND flash memory from Samsung. Officially, Samsung isn't disclosing the layer count, but they've claimed it's 40% more than their previous generation which was 92L, so this should be 128L 3D NAND. Samsung isn't the first to market with 128L NAND (SK hynix by less than a month), but it shows that layer counts are increasing and capacity should be as well.

Historically, the PRO line of SSDs use some of Samsung's fastest and most durable NAND available - this is what gives the products the PRO name. This time around, Samsung is changing things to help expand its Pro line customer base - Samsung is abandoning the use of the two bit per cell (MLC) memory that has been the hallmark of the PRO product lines, and with the 980 PRO, Samsung is finally switching to three bit per cell (TLC) NAND flash memory. This change is not unprecedented: Samsung has been almost completely alone in their continued use of 2-bit MLC NAND. By comparison, the rest of the SSD industry (consumer and enterprise) has moved from MLC to TLC, even on the leading edge designs. 

The historical reasoning for choosing MLC NAND over TLC NAND has always boiled down to two main factors: MLC tends to be faster, and it has higher write endurance. TLC NAND may be slower than MLC NAND in general, but that doesn't mean that TLC SSDs have to be slower than MLC SSDs. The performance advantages of MLC NAND for consumer use have been greatly reduced by the universal adoption of SLC write caching on TLC SSDs, and the trend toward larger SLC caches. Unless a user is going well beyond the SLC cache, a TLC drive with an SLC cache is noticably more preferable from a capacity standpoint than an MLC drive.

Write endurance has always been an important issue to keep an eye on, but the SSD industry has successfully prevented it from becoming a serious problem for consumers. Improved error correction and the fundamental advantages of 3D NAND over older planar NAND have helped, but the biggest factor has been the growth of drive capacities. The total write endurance of a SSD scales roughly linearly with its capacity: a 2TB drive can handle about twice as many TB of writes over its lifespan as a 1TB drive. However, consumer storage needs don't grow in the same way as enterprise storage needs. When a consumer moves from a 512GB drive to 1TB or 2TB, most of the extra capacity that gets used is for relatively static data: photos, videos and games that aren't modified all that often, and certainly not multiple times a day. 

The 980 PRO's use of TLC instead of MLC may be the end of an era for SSDs, but it doesn't necessarily mean that the drive isn't worthy of the "PRO" name; the 980 PRO is still very clearly at the high end of the consumer market.


In many ways, this drive could have easily been labeled the 980 EVO as a replacement for the 970 EVO Plus. Along with switching to TLC NAND, Samsung has cut the write endurance ratings in half to 0.3 DWPD and dropped the usable capacities down to the typical TLC/EVO levels of 250/500/1000 GB instead of 256/512/1024 GB. TLC means the 980 PRO now relies on SLC caching for its peak write speeds, and write performance will drop substantially if the SLC cache is ever filled. However, Samsung has offset this by configuring the 980 PRO to use substantially larger SLC cache sizes than their previous EVO drives, and this is what will give it the Pro name more than anything else.. MSRPs are also now much lower, and comparable to other TLC-based PCIe 4 SSDs.

The basic layout and look of Samsung's M.2 NVMe SSDs has changed little over the years even as the components have been upgraded. The Elpis controller is their second to feature a metal heatspreader on the controller package. This is the third generation of drives to use copper foil in the label on the back of the drive as an additional heatspreader.

After the PCIe 4 support and 8nm fab process, the next most important feature of the new Samsung Elpis is its support for 128 IO queues, up from 32 in the previous Phoenix controller. The most common use case for multiple IO queues on a NVMe SSD is for the OS to assign one queue per CPU core, so that no core-to-core synchronization is required for software to submit new IO commands to the SSD. Now that CPU core counts have grown well beyond 32, it makes sense for Samsung to support more queues—especially since these NVMe controllers are also used in Samsung's entry-level enterprise and datacenter NVMe SSDs.

Samsung Client/Consumer PCIe SSD Controller History
Codename Elpis Phoenix Polaris UBX UAX
Part Number S4LV003 S4LR020 S4LP077 S4LN058 S4LN053
Host Interface PCIe 4.0 x4 PCIe 3.0 x4 PCIe 3.0 x4 PCIe 3.0 x4 PCIe 2.0 x4
Protocol Support NVMe 1.3c NVMe 1.3 NVMe 1.2 NVMe 1.1
(or AHCI)
AHCI
Number of IO Queues 128 32 7 8 1
Max Queue Size 16384 (per queue) 32
Fabrication Process 8nm 14nm ? ? ?
DRAM Support LPDDR4 LPDDR4 LPDDR3 LPDDR3 LPDDR2
Retail Consumer
Products
980 PRO 970 PRO
970 EVO
970 EVO Plus
960 PRO
960 EVO
950 PRO (None)
Client OEM
Products
PM9A1 SM981
PM981
SM961
PM961
SM951
PM951
XP941

The NVMe protocol hasn't added any major must-have features since the version 1.1 used by the 950 PRO, but Samsung has maintained compliance with later versions and implemented some of the new optional features. The 980 PRO does not advertise compliance with the latest NVMe 1.4 specification and instead claims compliance with version 1.3c, but this has basically no practical impact.

This Review

For today's review, we're focused specifically on high-end consumer SSDs. The drives to pay attention to are:

  • Samsung 970 Pro (64L MLC)
  • Samsung 970 Evo (64L TLC)
  • Samsung 970 Evo Plus (92L TLC)
  • Any Phison E16 Drive at PCIe 4.0, such as Seagate FireCuda 520 (96L TLC) 
  • Any Phison E12 Drive at PCIe 3.0, such as Seagate FireCuda 510 (64L TLC)
  • Any Silicon Motion SM2262 PCIe 3.0 drive, such as Kingston KC2500
  • Other Flagships: WD Black SN750, Intel Optane 905P, SK hynix Gold P31

We're also going to add in a PCIe 3.0 x8 enterprise drive, the Samsung PM1725a. The PM1725a is an interesting choice as it is a 6.4TB high-end enterprise SSD that's a few years old. It  has as much PCIe bandwidth as new PCIe 4.0 x4 SSDs, but the PM1725a is tuned for enterprise use cases: its lack of SLC caching hurts peak write performance, but its read throughput is still impressive at over 6GB/s for sequential and over 1M IOPS for random reads. The downside is that it can require 20+ Watts to deliver that kind of performance. We shall see if the jump from PCIe 3.0x8 to PCIe4.0x4 of its own makes it worth it.

As always, comparisons against other drives can be made using our Bench tool.

Testing PCIe 4.0
Comments Locked

137 Comments

View All Comments

  • msroadkill612 - Tuesday, October 13, 2020 - link

    Yep. I find the raw sequential speeds exciting too - its not just about IOPS :)

    This processor load balancing coincides w/ some very handy advances in mainstream system memory - typically? 64GB (2x 32GB 3200 cl16 ~$220 atm) w/ speeds to ~45-50GB/s on AM4?,

    a PCIE 4 GPU w/ a 32GB/s link vs the former 16GB/s. Its little mentioned, but seems an important plateau - ~64GB at 32GB/s seems a pretty usable supplemental tier of cache for the gpu?

    quite possibly, nvme ports on the GPU's Infinity Fabric bus on ~BigNavi to bypass a potentially bottlenecked pcie bus - AMD did it before with a pro Vega card - an nvme raid array on the gpu.

    individually they are increments in currently usable gaming memory & bandwidth (if not IOPS), but collectively they could be a force which affects gaming?

    Games are what they are due to the restrictions of yore. Of course they are coded to isolate within gpu resources.. it was the only way to run fast enough. Reduce the restrictions tho, & add new usable resources, & games change to provide new & richer experiences.

    MS FS is perhaps a forerunner of this new mindset - it likes massive memory, but is fun at 30FPS.
  • crabperson - Tuesday, September 22, 2020 - link

    Thanks for the comparison to the PM1725a, I didn't realize how the lack of an SLC cache hurt it so much! I got a used 3.2 TB 'b version for a song, still holding out on Haswell here and probably won't upgrade until next year (Zen 3 may convince me otherwise).
    Looking forward to Phison's updated controllers and 2TB+ drives next year. Definitely don't need to waste money on the Pro line anymore.
  • Billy Tallis - Tuesday, September 22, 2020 - link

    I was actually surprised how poorly the PM1725a fared on the consumer tests. I knew that the lack of SLC caching would hurt its writes, but it also appears to be heavily optimized for high queue depths at the expense of low queue depth performance.

    I'm planning to have some overlap between the enterprise and consumer synthetic benchmarks going forward, so there should be more opportunities to notice stuff like this.
  • ZeDestructor - Tuesday, September 22, 2020 - link

    Any particular reson for not running the 3 desktop loads as well? I'm curious how the drives perform in more "real-world" desktop workloads too
  • Billy Tallis - Tuesday, September 22, 2020 - link

    Time constraints, mostly. I grabbed the PM1725a because of its potential to show similar peak throughput, and it takes less than two hours to run the synthetic tests. A full set of ATSB results is a minimum of 12 hours plus however long it takes to fill the drive twice.
  • ZeDestructor - Wednesday, September 23, 2020 - link

    Couldn't you do it during downtime and then lump the results directly into bench? I'm not particularly fussed about having the results in this particular review, but they would be very nice to have around eventually™ for weirdos like me who buy used server drives for cheap and stick em into the desktop.
  • PopinFRESH007 - Tuesday, September 22, 2020 - link

    The Rocket 4 Plus was already announced and should be shipping this year with what looks to be better performance than this. Will be interesting to see what the price will be. The E18 also supports NVMe 1.4 rather than 1.3c on the 980 Pro.
  • ToTTenTranz - Tuesday, September 22, 2020 - link

    So.. is this a SSD that can go into the PS5 as expandable storage?
  • Billy Tallis - Tuesday, September 22, 2020 - link

    Probably. Sony hasn't put out their list of officially approved/tested SSDs yet, but this one should qualify and then some.
  • UltraWide - Tuesday, September 22, 2020 - link

    The RANDOM R/W scores are average. It looks like the SK Hynix is a better SSD for real world use.

Log in

Don't have an account? Sign up now