DDR400/2.4GHz Performance

DDR400 (2.4GHz) Gaming Performance

DDR400 (2.4Ghz) UNBuffered Memory Test

DDR400 (2.4GHz) Standard (Buffered) Memory Test

DDR400 (2.4GHz) Calculation Performance

DDR400 (2.4GHz) Gaming Performance


Performance Comparisons DDR436/2.4GHz Performance
Comments Locked

53 Comments

View All Comments

  • renzokuken - Wednesday, March 30, 2005 - link

    Wesley, you've made my day. Thankyou for this follow-up review. The only thing I didn't like is the following statement "The Corsair did not do as well at the highest speeds on the DFI as it has done on other platforms, but that can likely be fixed with a BIOS revision". I'd love to know if/when this BIOS revision will be released and how much it will affect the Corsairs results.

    Btw, if anyone can tell me how to change the password required to post a comment I would be eternally grateful
  • arswihart - Wednesday, March 30, 2005 - link

    zebo, i have no idea what you tried to just say
  • JoKeRr - Wednesday, March 30, 2005 - link

    look at corsair and mushkin tccd (3200s) that doesn't use BP pcb, they almost never break 260 either
  • JoKeRr - Wednesday, March 30, 2005 - link

    but I don't ballsitix uses BP pcb, if it does, it will prob. kill tccd.
  • Zebo - Wednesday, March 30, 2005 - link

    Consistancy. It's not there. Just browse various forums.. some like us report kick arse performance some can't even get 220Mhz out of it w low timings.

    When you buy TCCD any moron can get at least 275Mhz out of it which is very appealing until you look past sisuck numbers. Also, in general, TCCD is more flexible because of that. Can run 2-2-2 @ 200 just like Ballistix but can also run up around 300Mhz and everything in between. I've never seen ballistix posting at anything above 275 w/1T.
  • Zebo - Wednesday, March 30, 2005 - link

    "anandtech is the biggest dfi propaganda site on the web"

    They use the best mobo in mem guides this is nothing new where you been? Back in NF3 days it's was MSI NEO2..Back w intel tests it was Asus..actually this is the first time I ever seen them using DFI which stand to raseon since it's the NF4 winnar.
  • ozzimark - Wednesday, March 30, 2005 - link

    #35-
    one thing i never understood. ballistix (more the micron -5b chips than ballistix itself) has an amazing performance/ocing to cost ratio. plus, it oc's at tight timings fairly well without much voltage. how come it was never very popular like BH-5/UTT and TCCD?
  • Zebo - Wednesday, March 30, 2005 - link

    Joker, Ballistix is essentially EB..so it likes up to 3.1 too but runs hot...need to cool it activly and have a mobo which staggers mem like DFI's.. i.e geographically in slots: Mem--Blank--Mem--Blank to allow air flow.

    I personally run 245Mhz 2.5-2-2 1T @ 2.8

    But screwing around w/ volts I get 261 2.5-2-2 w/o error But since I'm a silence freak it's not for me.

    Still this winbond UTT mem is better overall if you plan to send high volts to mem anywayz
  • Zebo - Wednesday, March 30, 2005 - link

    "TCCD isn't the holy grail of RAM anymore."

    It never was. It's loose arse timings always got whooped by Ballistix, and especially "old" BH-5 in the benchmarks running async with tight timings and moderate BW. This new ram is from co that brought you BH-5 and it's prolly better except it can't run 1.5 CAS.
  • arswihart - Wednesday, March 30, 2005 - link

    anandtech decides to focus on dfi and ocz as a magical combination, no matter what qualifications they make in the article they are still selling these specific products to readers. Its reflected in the forums and probably in sales. I don't like how anandtech's articles are beginning to constantly offer suggestions and declarations about the best this and that (often just based on what they have reviewed to date, not all that is available).

Log in

Don't have an account? Sign up now