Left4Dead2

Left4Dead2 is a classic Steam FPS DirectX 9 shooter. It changes very quickly from GPU to CPU bound over a certain limit - our test is a timedemo taken from a run through of the first level.

Left4Dead2 Single 5850

Left4Dead2 - 1024x768 iGPU

Dirt 2

Dirt 2 came to the PC in December 2009, developed by Codemasters with the EGO Engine. Resulting in favorable reviews, we use Dirt 2’s inbuilt benchmark under DirectX 11 to test the hardware. We test two different resolutions at two different quality settings using a discrete GPU, and an appropriate integrated GPU setting.

Dirt II Single 5850

Dirt II - 1024x768 iGPU

Metro 2033

Metro 2033 is a challenging DX11 benchmark that challenges every system that tries to run it at any high-end settings. Developed by 4A Games and released in March 2010, we use the inbuilt DirectX 11 Frontline benchmark to test the hardware.

Metro 2033 Single 5850

Metro 2033 - 1024x768 iGPU

Again, due to the turbo design feature of the Zotac, it outperforms all the other Sandy Bridge motherboards we've tested so far in iGPU modes.

Computation Benchmarks Final Words
Comments Locked

29 Comments

View All Comments

  • DaveSimmons - Thursday, September 22, 2011 - link

    SilentPCReview has covered the Silverstone and Lian-li cases for gaming builds, and CyberPowerPC will build you a SG07 system with a GTX 570 if you want one.

    But yes, some SFF gaming build tests from AT would be welcome as well.

    My gaming system is usually just a single card and 2 x HDDs (or SSD + HDD for my next build) so most of even a micro-ATX case sits there empty taking up space.
  • TrackSmart - Sunday, September 25, 2011 - link

    Thanks for the heads up about the articles. I'll check them out.
  • LeftSide - Thursday, September 22, 2011 - link

    Is there any way we could get some power numbers on a power supply that more closely resembles the power load these small HTPC motherboards will be using. I don't understand why you can't review these smaller boards with a good 80% 300 watt PS. Most of the people interested in these boards are interested in HTPC usage and idle load is the most important number. Your power numbers are typically useless, because of the low efficiency a 1000 watt PS will run a 50 watt load.

    The reviews on Anandtech are generally great and very informative, but I don't understand why you even test power consumption when the results are so skewed.
  • TrackSmart - Thursday, September 22, 2011 - link

    As a fellow reader of these reviews, I understand that you can't have any consistency in the results unless you test under the same conditions every time. And that means having a powersupply that can handle any build.

    That being said, I agree that some tests with small form factor appropriate hardware would be of interest to folks... Not good for comparing performance differences between boards, but to see what you can do with a real build in terms of performance vs noise , heat, and actual power usage. Maybe they'll do an updated small form factor article. Their last guide was based around low power stuff (look it up), but a higher performance update to that guide would be cool.
  • IlllI - Friday, September 23, 2011 - link

    this board got abysmal feedback over on hardforum.
    some guy had 19 of them die (1+18 replacements if i recall). his company decided to ditch the entire brand due to reliability.
  • moolman - Friday, September 23, 2011 - link

    I didn't try this board but I tried two of the H67 boards. Both boards had defective displayports, they wouldn't work, everything else worked fine. Just beware, I posted and called Zotac for help and it seems they know of the problem but who uses display ports for integrated graphics, so I was probably the only guy complaining about it. But I have a 30" monitor so no choice in the matter. Luckily I bought from Fry's and hence able to try out 2 boards. Ended up with the Intel H56 ITX, glad I did, quieter and uses less energy. Thanks Zotac for sucking.
  • lwatcdr - Friday, September 23, 2011 - link

    I could see this as a one box server solution for a small business.
    Two nics so configure this as a fire wall.
    WiFi= Wifi access point for the office "If it supports it."
    Two SATA 6 ports Two big drives in a RAID.
    Two SATA 3 ports boot drive/swap/
    MSATA cache.
    Install Asterisk for your phone system, vTiger CRM, an email server, what ever else you want or need.
    USB ports Backup drives, printers, scanners.
    You have the makings of an all in one small business server.
  • Shadowmaster625 - Friday, September 23, 2011 - link

    Does that thing even have a specified efficiency at 50 watts? I dont think the 80 plus applies unless you are at 10% load.
  • waldojim42 - Friday, September 23, 2011 - link

    I see no reason to drop in a new bios just to compete with other manufacturers. If the others want to compete with Zotac, add in the "out of spec" options for people! I find it odd that it was more "fair" for you guys to kill off one channel of ram, than leave the thing to its higher clock rates.

    I am more interested in how well it handled running 4x over on all cores using stock cooling, than running a crippled machine.

Log in

Don't have an account? Sign up now