I wonder if those overly-expensive external TB3 video card enclosures could be configured with an integrated liquid cooling system. It probably wouldn't add all that much to the cost.
For a water cooled, card, probably 100$ for the block, 100$ for rad/fan, and 100$ for pump/res/fittings, and those are can go much higher. 150-200$ block's aren't uncommon, and neither are 25$ fans or 100-120$ radiators. D5 pumps can cost up to 100$, and fittings for 10$ ea.
so Gigabyte's 2000$ eGPU = 2080 Ti (1200$) + 450W PSU (50$) + GPU Block (100$) + Rad (100$) + Pump (100$) + Enclosure (200$) = 1800$. Not that bad actually
Making assumptions from the photos but did not see it mentioned in the article... you pick and choose the color of the liquid that you put in the system? Can you mix them? Do they hold their color or dissolve into green and brown sludge if you mix them?
you can definitely mix dyes which is what those are and u should be able to use them in any coolant... but obviously u want clear . As far as mixing them , you will create whatever color comes out , that’s why it’s recommended to mix the dyes separately outside the loop to get the color u want.
Nice card, but paying 600$ for a 400$ card makes no sense. That puts it between 2070 super and 2080 super and both of those are better cards even without overclocking.
cost of EK block factory mounted and with warranty coverage, sounds about right to me...note, I will not buy liquid anything till it is BUILT IN to the die/chip itself (IBM have already proven is able to be done)
At some point in not so distant future they (designers of high performance) GPU-CPU etc will likely have no other option, will likely be mandatory once Optical based becomes ready to RTM world wide (only a matter of time and infrastructure to make it possible)
Thanks for sharing a post with us. By the way, if you are QuickBooks user then try to visit Quickbooks online support and get the best support from them for more detail visit at http://quicksupports.co.uk
When computers become fashion accessories for boys, the result is a 50% markup for a product that does not at all offer 50% better results. It's hardly any different than buying lip gloss in a large container that is only half full and the application thereof does not result in an additional $10 USD of attention from other people. Have fun with this one kiddos. It's long past time that guys have to preen and puff in an attempt to impress uninterested third parties at significant personal expense.
"Out of the box, the PowerColor Radeon RX 5700 XT Liquid Devil features GPU boost clock of up to 2070 MHz, the highest frequency of AMD’s Navi XT chip on a commercial card to date. Meanwhile, the key feature of the video card is its overclocking potential which promises to be very high"
That "very high" is likely something like +5% max over already too high 2070MHz.
Coincidentally, 2070 Super is going to be both cheaper and superior.
We’ve updated our terms. By continuing to use the site and/or by logging into your account, you agree to the Site’s updated Terms of Use and Privacy Policy.
16 Comments
Back to Article
Great_Scott - Wednesday, November 20, 2019 - link
GPU liquid cooling is a PITA for most rigs.I wonder if those overly-expensive external TB3 video card enclosures could be configured with an integrated liquid cooling system. It probably wouldn't add all that much to the cost.
firewrath9 - Wednesday, November 20, 2019 - link
Gigabyte's got you covered.https://www.techspot.com/news/82605-gigabyte-launc...
For a water cooled, card, probably 100$ for the block, 100$ for rad/fan, and 100$ for pump/res/fittings, and those are can go much higher. 150-200$ block's aren't uncommon, and neither are 25$ fans or 100-120$ radiators. D5 pumps can cost up to 100$, and fittings for 10$ ea.
so Gigabyte's 2000$ eGPU = 2080 Ti (1200$) + 450W PSU (50$) + GPU Block (100$) + Rad (100$) + Pump (100$) + Enclosure (200$) = 1800$. Not that bad actually
sonny73n - Thursday, November 21, 2019 - link
At $1500 I might consider it, if it’s from another brand. Gigabyte NO!neogodless - Wednesday, November 20, 2019 - link
Typo in first paragraph: "Naxi"Making assumptions from the photos but did not see it mentioned in the article... you pick and choose the color of the liquid that you put in the system? Can you mix them? Do they hold their color or dissolve into green and brown sludge if you mix them?
Hxx - Wednesday, November 20, 2019 - link
you can definitely mix dyes which is what those are and u should be able to use them in any coolant... but obviously u want clear . As far as mixing them , you will create whatever color comes out , that’s why it’s recommended to mix the dyes separately outside the loop to get the color u want.benedict - Wednesday, November 20, 2019 - link
Nice card, but paying 600$ for a 400$ card makes no sense. That puts it between 2070 super and 2080 super and both of those are better cards even without overclocking.firewrath9 - Wednesday, November 20, 2019 - link
People bought waterblocks for GTX 1070s last gen, and those were like 400$ cards.A high-end 1070 (say a strix) + waterblock = ~550$
A red devil is 430$, so the block upgrade is 170$. Not that bad considering you get some dyes.
beginner99 - Thursday, November 21, 2019 - link
You also get a better bin, not just the block. But yeah if you can get simply a better card for same money, it's not very useful.Dragonstongue - Wednesday, November 20, 2019 - link
cost of EK block factory mounted and with warranty coverage, sounds about right to me...note, I will not buy liquid anything till it is BUILT IN to the die/chip itself (IBM have already proven is able to be done)At some point in not so distant future they (designers of high performance) GPU-CPU etc will likely have no other option, will likely be mandatory once Optical based becomes ready to RTM world wide (only a matter of time and infrastructure to make it possible)
Cryio - Thursday, November 21, 2019 - link
The binning is insane.JayzTwoCents randomly dialed 2200 Core Clock with no modified power delivery and 1.169V and it ran average at 2150 MHz.
I'm still testing with PowerPlay mod to make my Red Devil 5700 XT to run at higher than 2040 MHz without artifacts.
quickbooks02 - Thursday, November 21, 2019 - link
Thanks for sharing a post with us. By the way, if you are QuickBooks user then try to visit Quickbooks online support and get the best support from them for more detail visit at http://quicksupports.co.ukM O B - Thursday, November 21, 2019 - link
Why is the card double-wide still. One of the advantages of liquid cooled GPUs is that you can make them all single-slot.PeachNCream - Thursday, November 21, 2019 - link
When computers become fashion accessories for boys, the result is a 50% markup for a product that does not at all offer 50% better results. It's hardly any different than buying lip gloss in a large container that is only half full and the application thereof does not result in an additional $10 USD of attention from other people. Have fun with this one kiddos. It's long past time that guys have to preen and puff in an attempt to impress uninterested third parties at significant personal expense.peevee - Friday, November 22, 2019 - link
"Out of the box, the PowerColor Radeon RX 5700 XT Liquid Devil features GPU boost clock of up to 2070 MHz, the highest frequency of AMD’s Navi XT chip on a commercial card to date. Meanwhile, the key feature of the video card is its overclocking potential which promises to be very high"That "very high" is likely something like +5% max over already too high 2070MHz.
Coincidentally, 2070 Super is going to be both cheaper and superior.
peevee - Friday, November 22, 2019 - link
This is "+5% max PERFORMANCE", not purely clocks.