Intel's first 22nm CPU, codenamed Ivy Bridge, is off to an odd start. Intel unveiled many of the quad-core desktop and mobile parts last month, but only sampled a single chip to reviewers. Dual-core mobile parts are announced today, as are their ultra-low-voltage counterparts for use in Ultrabooks. One dual-core desktop part gets announced today as well, but the bulk of the dual-core lineup won't surface until later this year. Furthermore, Intel only revealed the die size and transistor count of a single configuration: a quad-core with GT2 graphics.

Compare this to the Sandy Bridge launch a year prior where Intel sampled four different CPUs and gave us a detailed breakdown of die size and transistor counts for quad-core, dual-core and GT1/GT2 configurations. Why the change? Various sects within Intel management have different feelings on how much or how little information should be shared. It's also true that at the highest levels there's a bit of paranoia about the threat ARM poses to Intel in the long run. Combine the two and you can see how some folks at Intel might feel it's better to behave a bit more guarded. I don't agree, but this is the hand we've been dealt.

Intel also introduced a new part into the Ivy Bridge lineup while we weren't looking: the Core i5-3470. At the Ivy Bridge launch we were told about a Core i5-3450, a quad-core CPU clocked at 3.1GHz with Intel's HD 2500 graphics. The 3470 is near identical, but runs 100MHz faster. We're often hard on AMD for introducing SKUs separated by only 100MHz and a handful of dollars, so it's worth pointing out that Intel is doing the exact same here. It's possible that 22nm yields are doing better than expected and the 3470 will simply quickly take the place of the 3450. The two are technically priced the same so I can see this happening.

Intel 2012 CPU Lineup (Standard Power)
Processor Core Clock Cores / Threads L3 Cache Max Turbo Intel HD Graphics TDP Price
Intel Core i7-3960X 3.3GHz 6 / 12 15MB 3.9GHz N/A 130W $999
Intel Core i7-3930K 3.2GHz 6 / 12 12MB 3.8GHz N/A 130W $583
Intel Core i7-3820 3.6GHz 4 / 8 10MB 3.9GHz N/A 130W $294
Intel Core i7-3770K 3.5GHz 4 / 8 8MB 3.9GHz 4000 77W $332
Intel Core i7-3770 3.4GHz 4 / 8 8MB 3.9GHz 4000 77W $294
Intel Core i5-3570K 3.4GHz 4 / 4 6MB 3.8GHz 4000 77W $225
Intel Core i5-3550 3.3GHz 4 / 4 6MB 3.7GHz 2500 77W $205
Intel Core i5-3470 3.2GHz 4 / 4 6MB 3.6GHz 2500 77W $184
Intel Core i5-3450 3.1GHz 4 / 4 6MB 3.5GHz 2500 77W $184
Intel Core i7-2700K 3.5GHz 4 / 8 8MB 3.9GHz 3000 95W $332
Intel Core i5-2550K 3.4GHz 4 / 4 6MB 3.8GHz 3000 95W $225
Intel Core i5-2500 3.3GHz 4 / 4 6MB 3.7GHz 2000 95W $205
Intel Core i5-2400 3.1GHz 4 / 4 6MB 3.4GHz 2000 95W $195
Intel Core i5-2320 3.0GHz 4 / 4 6MB 3.3GHz 2000 95W $177

The 3470 does support Intel's vPro, SIPP, VT-x, VT-d, AES-NI and Intel TXT so you're getting a fairly full-featured SKU with this part. It isn't fully unlocked, meaning the max overclock is only 4-bins above the max turbo frequencies. The table below summarizes what you can get out of a 3470:

Intel Core i5-3470
Number of Cores Active 1C 2C 3C 4C
Default Max Turbo 3.6GHz 3.6GHz 3.5GHz 3.4GHz
Max Overclock 4.0GHz 4.0GHz 3.9GHz 3.8GHz

In practice I had no issues running at the max overclock, even without touching the voltage settings on my testbed's Intel DZ77GA-70K board:

It's really an effortless overclock, but you have to be ok with the knowledge that your chip could likely go even faster were it not for the artificial multiplier limitation. Performance and power consumption at the overclocked frequency are both reasonable:

Power Consumption Comparison
Intel DZ77GA-70K Idle Load (x264 2nd pass)
Intel Core i7-3770K 60.9W 121.2W
Intel Core i5-3470 54.4W 96.6W
Intel Core i5-3470 @ Max OC 54.4W 110.1W

Power consumption doesn't go up by all that much because we aren't scaling the voltage up significantly to get to these higher frequencies. Performance isn't as good as a stock 3770K in this well threaded test simply because the 3470 lacks Hyper Threading support:

x264 HD Benchmark - 2nd pass - v3.03

Overall we see a 10% increase in performance for a 13% increase in power consumption. Power efficient frequency scaling is difficult to attain at higher frequencies. Although I didn't increase the default voltage settings for the 3470, at 3.8GHz (the max 4C overclock) the 3470 is selecting much higher voltages than it would have at its stock 3.4GHz turbo frequency:

Intel's HD 2500 & Quick Sync Performance
Comments Locked

67 Comments

View All Comments

  • etamin - Thursday, May 31, 2012 - link

    I just glossed through the charts (will read article tomorrow), but I noticed there are no Nehalems in the comparisons. It would be nice if both a Bloomfield and a Gulftown were thrown in. If Phenom IIs are still there, Nehalem shouldn't be THAT outdated right? Anyways, I'm sure the article is great. Thanks for your hard work and I look forward to reading this at work tomorrow :)
  • SK8TRBOI - Thursday, May 31, 2012 - link

    I agree with etamin - if Phenom is in there, a great Intel benchmark cpu would be the Nehalem i7-920 D0 OC'd to 3.6Ghz - I'd wager a significant percentage of Anand's readers (myself included!) still have this technological wonder in our everyday rigs. The i7-920 would be a good 'reference' for us all when evaluating/comparing performance.
    Thanks, and awesome article, as always!
  • CeriseCogburn - Thursday, May 31, 2012 - link

    It's always "best" here to forget about other Intel and nVidia - as if they suddenly don't exist anymore - it makes amd appear to shine.
    Happens all the time. Every time.
    I suppose it's amd's evil control - or the yearly two week island vacation (research for reviewers of course)
  • LancerVI - Thursday, May 31, 2012 - link

    Throw me into the list that agrees.

    Still running a i7 920 C0. the Nehalems being in the chart would've been nice.
  • jordanclock - Thursday, May 31, 2012 - link

    That's what Bench is for.
  • HanzNFranzen - Thursday, May 31, 2012 - link

    I have to agree as well. I have an i7 920 C0 and often wonder how it stacks up today against Ivy Bridge. I'm thinking that holding off for Haswell is a safe bet even though I have the upgrade itch! It's been 3 years, which is great to have gotten this much milage out of my current system, but I wanna BUILD SOMETHING!!
  • CeriseCogburn - Monday, June 11, 2012 - link

    It's whole video card tier of frame rate difference in games, plus you have sata 6 and usb 3 to think about not to mention pci-e 3.0 to be ready for when needed.

    Buy your stuff and sell your old parts to keep it worth it.
  • jwcalla - Thursday, May 31, 2012 - link

    I'm guessing the stock idle power consumption number is with EIST disabled?

    I've been waiting for some of these lower-powered IVB chips to come out to build a NAS. Was thinking a Core i3 (if they ever get around to releasing it), or maybe the lowest Xeon. Though at this point I might just bite the bullet and wait for 64-bit ARM... or go with a Cortex-A15 maybe.
  • ShieTar - Thursday, May 31, 2012 - link

    If a Cortex-A15 would give you enough computing power, you should also be happy with a Pentium or even a Celeron. The i3 is already rather overkill for a simple NAS.

    I have a fileserver with Windows Server Home running on a Pentium G620, and it has absolutely no problem to push 120 MB/s over a GBit Ethernet switch from a RAID-0 pack of HDDs while running µtorrent, Thunderbird, Miranda and Firefox on the side. Power consumption of the complete system is around 40-50W in idle, and I havn't even shopped for specifically low-power components but used a lot of leftovers.
  • BSMonitor - Thursday, May 31, 2012 - link

    Yeah, the CPU is just 1 part of the power consumption puzzle.. And since in "file sharing" mode, it will almost always be in a low power/idle state... An ARM CPU would show little improvement..

    But if you ever offloaded any kind of work to that box, you'd have wasted your money with an ARM box, as no ARM processor will ever match real task performance of any of the x86 processors.

Log in

Don't have an account? Sign up now