As part of the ASUS ROG Press Conference today here at Computex, ASUS has announced two of the anticipated members of the Z97 ROG lineup along with an unexpected new ROG entry into the AMD APU market.  The Maximus VII Formula and Maximus VII Impact are Z97 versions of their Z87 brethren, using the enhancements that Z97 brings such as SATA Express, M.2 and lower DPC Latency.

The Formula use the full cover body plate similar to the previous version, although it is more styled in the power delivery heatsink area while still containing a combination air/water cooler.  In order to reinforce structural rigidity, the rear of the motherboard also has a full cover body plate affixed at nine points around the motherboard.

The Maximus VII Formula uses dual SATAe (one from the chipset, one from an ASMedia controller) as well as ASUS’ mPCIe Combo III on the rear IO to give access to an mPCIe slot and an M.2 (x2 and SATA) slot.  The power delivery is using higher specification components to the standard channel range, and the central element of the motherboard lights up when in use.  Audio is from the SupremeFX solution, which uses SenseAmp to automatically adjust for headphones up to 600 ohms.

The Maximus VII Impact builds on the VI Impact which we reviewed earlier this year and rewarded with good reason.  The new version comes with an updated power delivery daughterboard (Impact Power II), an updated audio daughterboard (SupremeFX Impact II), and mPCIe Combo IV with 802.11ac + Bluetooth 4.0.

The new features include M.2 x4 as part of mPCIe Combo IV, which given the nature of the Impact and the array of extra features I would assume, like the Extreme6, this comes from the CPU.  That would mean the PCIe 3.0 slot would reduce to x8, but as shown on the Extreme6 review, for single card gaming at 1080p, gaming frame rates reduce by sub-1%.  It does mean that four lanes are unused however, which might not be ideal.  Another new feature is the Impact CoolHub, a card connected to the motherboard with two 4-pin fan headers as well as an LN2 header for extreme overclockers.  The Maximus VI Impact was a favorite among DRAM enthusiasts and holds several records for DRAM clocking, so these users should appreciate the additional features.

The odd ball of the announcements is the ROG Crossblade Ranger.  The last time ASUS designed an ROG AMD motherboard was the Crosshair IV Formula-Z for AM3+, and AMD APU enthusiasts have been requesting something similar to the Maximus series on the AMD side.  The Crossblade Ranger takes a lot of cues from the Maximus VII range, especially in terms of color scheme, software, audio features and Ethernet.

The styling mimics that of the Maximus VII Ranger (one could assume that the chipset heatsink is the same due to the motif), using sharp angular edges in typical ROG style.  Due to the AMD nature of the motherboard I would assume that there is no SLI, but there is SupremeFX audio, 8 SATA ports, Keybot, Slow Mode, LN2 Mode, voltage check points, and even an Intel NIC.  Yes, an Intel NIC on an AMD motherboard.

The Formula and Crossblade Ranger are expected in late July, with the Impact in Q3.  Pricing will be determined closer to the launch date.

Comments Locked

16 Comments

View All Comments

  • 457R4LDR34DKN07 - Tuesday, June 3, 2014 - link

    M.2 X4 on MF VII! Nice
  • Galatian - Tuesday, June 3, 2014 - link

    On the Impact yes, but not on the other sizes...too bad. I was really hoping that at least one motherboard would come out, which would use 4 of the PCIe 2.0 lanes the chipset provides for the M.2 slot. Guess I'll pass Z97 entirely.
  • ViperV990 - Tuesday, June 3, 2014 - link

    The Impact's M.2 slot could very well be PCIe 2.0. Assuming six USB 3.0 ports and four SATA ports (no eSATA in sight), there should be eight available PCIe 2.0 lanes. LAN, WiFi, and sound are the only items on the board I can think of that need PCIe lanes. So that leaves five, enough to cover the M.2 slot.
  • 457R4LDR34DKN07 - Tuesday, June 3, 2014 - link

    "given the nature of the Impact and the array of extra features I would assume, like the Extreme6, this comes from the CPU"

    I think this will need to be clarified. Is it advertised as 32gb/s or 20gb/s. I also agree that while using pcie 3.0 is overkill as there is no m.2 drives yet supporting pcie 3.0. Will you really need the future proof of pcie 3.0 bandwidth. The affect on gpu bandwidth at 8x small. and this is mitx with little need for mgpu.
  • 457R4LDR34DKN07 - Wednesday, June 4, 2014 - link

    This site infers that the bandwidth for the MPCIE combo IV M.2 slot is 20gb/s which would suggest that the slot is PCIE 2.0 http://www.pcper.com/news/Motherboards/Computex-20...
  • Galatian - Tuesday, June 3, 2014 - link

    Let me clarify my statement: I was hoping for a better setup, with a PLX chip to allow 4 x Crossfire or SLI as well as a M.2 slot with 4 PCIe 2.0 lanes. It should be possible and they simply don't see why an "ultra enthusiast" needs like 10 "slow" SATA ports.
  • 457R4LDR34DKN07 - Tuesday, June 3, 2014 - link

    Have you checked out the Asrock Z97 extreme9 yet? It has PLX and does 4x CF or SLI http://www.asrock.com/mb/Intel/Z97%20Extreme9/inde...
  • Galatian - Tuesday, June 3, 2014 - link

    Nice! That's new. I've been eyeing the Extreme 6 but it lacked features I wanted. I might jump onto the Extreme 9 though!

    I noticed though ASUS did not announce any new Maximus Extreme? Maybe there is still something coming?
  • Hobz - Tuesday, June 3, 2014 - link

    There is no extreme. JJ stated this during a stream.
  • HellzHavoc - Tuesday, June 3, 2014 - link

    Are those copper components I see in the Crosschill??

Log in

Don't have an account? Sign up now