G.Skill has now rolled out its 32 GB unbuffered DDR4 modules in dual-channel and quad-channel memory kits. The modules are offered with data transfer rates from 2666 MT/s to 4000 MT/s and various modules are compatible with AMD’s Ryzen 3000/X570 as well as Intel’s X299/Z390 platforms.

Based on pre-binned 16 Gb memory chips and proprietary PCBs, G.Skill’s hardware boils down to sets of 32 GB DDR4 unbuffered DIMMs. Lower-end modules are set to be available as single pieces as they can be used by PC makers that need to lower their BOM cost, whereas higher-end parts will be offered as dual-channel and quad-channel kits for high-end desktops and workstations. The UDIMMs feature an XMP 2.0 SPD for setting speeds beyond JEDEC.

G.Skill's 32 GB Trident Z UDIMMs and Kits
Speed CL Timing Voltage Kit
DDR4-2666 CL18 18-18-43 1.2 V 1×32 GB 32 GB
2×32 GB 64 GB
3×32 GB 128 GB
4×32 GB 256 GB
CL19 19-19-43 1×32 GB 32 GB
2×32 GB 64 GB
4×32 GB 128 GB
8×32 GB 256 GB
DDR4-3200 CL16 18-18-38 1.35 V 1×32 GB 32 GB
2×32 GB 64 GB
4×32 GB 128 GB
8×32 GB 256 GB
DDR4-3600 CL18 25-25-45 1.4 V 2×32 GB 32 GB
4×32 GB 64 GB
DDR4-3800 CL18 22-22-42 1.35 V 2×32 GB 64 GB
DDR4-4000 CL18 25-25-45 1.4 V 4×32 GB 128 GB

As there are several platforms used by enthusiasts today, G.Skill will offer two families of products:

  • Trident Z Neo for AMD Ryzen 3000/X570 platforms
  • rident Z Royal for Intel platforms.

For AMD Ryzen 3000-based PCs, the highest-performing kits will be 64 GB DDR4-3800 CL18 as well as 128 GB DDR4-3600 CL18 offerings. For the Intel platform, the highest end kits will be 128 GB DDR4-4000 CL18 as well as 256 GB DDR4-3200 CL16. Validation for AMD is done using the MSI MEG X570 Godlike motherboard, whereas validation for Intel is made on the ASUS ROG Rampage VI Extreme Encore motherboard. Other motherboards will be validated over time, and likely up to the motherboard manufacturers in their own QVL.

All enthusiast-class 32 GB unbuffered DIMMs from G.Skill will be equipped with aluminum heat spreaders with an RGB lightbar with multiple lighting zones. The Trident Z Royal will come with polished silver or gold heat spreaders as well as a crystalline RGB lightbar, whereas the Trident Z Neo will use matte heat spreaders and an RGB lightbar.

One thing to keep in mind about 32 GB UDIMMs is that they may require a BIOS update as not all motherboards support them out-of-box.

G.Skill will start sales of its 32 GB UDIMMs as well as dual-channel and quad-channel kits that use them later this quarter. Pricing will depend on capacity as well as rated performance levels, but since these products are designed for high-end PCs, they will be priced accordingly.


Related Reading

Source: G.Skill

Comments Locked


View All Comments

  • LiviuTM - Wednesday, October 9, 2019 - link

    4×32 = 128? Niiice..
  • LiviuTM - Wednesday, October 9, 2019 - link

    No, sorry, I'm wrong again, 4×32 = 256.
  • DigitalFreak - Wednesday, October 9, 2019 - link

    4x32 = 128... It's times like these I'm glad people can't edit / delete their comments.
  • RealBeast - Wednesday, October 9, 2019 - link

    Agreed, but it also shows who has actually looked at the charts carefully and who just reads the comments. ;)
  • close - Thursday, October 10, 2019 - link

    Saddest thing is that more than a day later nobody bothered to fix this dumpster fire of a table.
  • ibnmadhi - Sunday, October 13, 2019 - link

    It's just par for the course when it comes to an article written by Anton Shilov. For some reason it seems that he finds it acceptable to write about things he doesn't understand and leave blatant and elementary errors uncorrected.
  • close - Sunday, October 13, 2019 - link

    I find it more an AT problem. This stuff slips under the radar too often and it doesn't happen in a vacuum.
  • close - Wednesday, October 16, 2019 - link

    Good to see that even a week later the table hasn't been touched. I guess AT is sticking by it, being one of the most reliable source of random mistakes and unfortunate coincidences on the interwebs.
  • catavalon21 - Wednesday, October 9, 2019 - link

    DigitalFreak, you missed the irony in his post, where he "corrected" it to what's actually on the chart.
  • yetanotherhuman - Thursday, October 10, 2019 - link

    What? :D

Log in

Don't have an account? Sign up now